Reveal Attachment Type FA with 2 Grooved Washers

Reveal Attachment Type FA with 2 Grooved Washers

Undercut Fastener

Aluminium L-bracket incl. 2 serrated washers

  • Assembly with undercut anchors KH type BH
  • For the invisible, back-sided attachment of reveal oder lintel panels
  • Natural stone
  • Artificial stone
  • Manufactured stone
  • Ceramics
  • Laminate (HPL)
  • Synthetic material
  • Fibre cement
  • Glass ceramics

Leg length: 100/60mm
Centre distance: 50/35mm
Leg width: 60/40mm
Leg thickness: 8/5mm

  • Assembly with undercut anchors KH type BH
  • For the invisible, back-sided attachment of reveal order lintel panels.
  • Natural stone
  • Artificial stone
  • Manufactured stone
  • Ceramics
  • Laminate (HPL)
  • Synthetic material
  • Fibre cement
  • Glass ceramics
  • KEIL offers reveal angle attachments for the attachment of jamb panels to main façade panels with the undercut anchor
  • These attachments have been developed from the point of view of a precise and quick assembly as well as a particularly simple handling.
  • Place the jamb angle on the drilled façade panel.
  • The assembly of the anchor is carried out as a pre-positioned installation with the threaded pin. The serrated washer is fixed with the ratchet nut.
  • Alternatively, insert the anchor with the screw and the serrated washer through the slotted hole into the undercut hole and tighten.
  • KEIL undercut anchors are monitored externally.